ALL PRODUCTS

• SCR / DOC Emulator for Volvo Penta Tier 4 Final / Stage IV QC

• SCR Emulator for Volvo, Renault DXi Euro 4/5 and EEV trucks, with Electrical System V2.

• Error Code Cleaner / Eraser for Volvo Trucks all models from 2013 till now.. Pocket Size

• Error Code DTC Cleaner / Reset Tool for Volvo USA / Mack with 9 PIN Round Diagnostic Connector 2007 - 2013

• For Volvo USA and Mack Trucks from 2014 till now.

SCR / DPF / DEF Emulator For Volvo USA and Mack Trucks. Plug and Play version QC.

• Euro 6 support
• Works with Renault trucks with DXI and DTI engines, supports EURO 6
• 12 months warranty

• Second edition original VOCOM 2 made in Germany by ACTIA

• The original Vocom 2 Mini.
• Support EURO 6

• VVDI2 Full Version for VW/Audi/BMW/Porsche/PSA/Remotes Add BMW FEM/BDC/VAG

Diagnostic Interface 2 (USB)

Webasto Thermo Test is diagnostic software for heaters from Webasto. The program supports almost all diagnostic-ready heaters. Its functions include the ability to read out and display control unit information as well as troubleshooting and device startup.

Shipping Notice: Free delivery does not apply to this item. Delivery costs are calculated based on your location. Please contact us for a shipping quote before or after placing your order.

• HaynesPro WorkshopData offers a single pathway to OEM-based technical data covering over 70 makes. We enable users to provide a top-quality service, without compromising OEM warranty cover. Most data is no more than two mouse-clicks away; fast and efficient access to the correct data saves you precious time.

• Comfortable Workstation Trolley by Jaltest

The Cojali 50105048 Wrench For BPW Axle Nut (110 mm, 3/4" Drive) is designed for safe and precise removal and installation of BPW axle nuts and protectors in heavy-duty vehicles.

• OEM: 03.364.29.03.0 BPW
• Cojali reference: 50105048

The Cojali 50105037 Wrench for BPW Axle Nut (110 mm) is designed for efficient removal and installation of BPW axle hubcap nuts, ensuring secure and precise servicing.

• OEM: 50105037
• Cojali reference: 50105037

The Cojali 50105022 Wrench For Hexagonal Axle Nut (1″ Drive, 105 mm) is designed for precise removal and installation of hexagonal axle nuts on commercial vehicle axles.

• OEM: 50105022
• Cojali reference: 50105022

The Cojali 50105144 Hexagonal Axle Nut Wrench DR. 1", 120 MM is designed for safe and precise removal and installation of hexagonal axle nuts in commercial vehicles. Made from durable materials, it ensures a secure fit and protects axle components during maintenance.

• OEM: 50105144
• Cojali reference: 50105144

The Cojali 50105023 Wrench For Hexagonal Axle Nut (1″ Drive, 95 mm) is designed for precise removal and installation of hexagonal axle nuts on commercial vehicle rear or front axles.

• OEM: 50105023
• Cojali reference: 50105023

The Cojali 50105040 Wrench for Hexagonal Axle Nut (140 mm) is built for heavy-duty removal and installation of SAF axle wheel nuts using impact wrenches.

• OEM: 1012002400 SAF
• Cojali reference: 50105040

The Cojali 50105041 Wrench for Hexagonal Axle Nut (85 mm) is designed for safe and efficient removal and installation of SAF axle wheel nuts in heavy-duty vehicles.

• OEM: 4434382800 SAF
• Cojali reference: 50105041

The Cojali 50105030 Hexagonal Axle Nut Socket (H36, 95 mm) is designed for precise removal and installation of axle nuts on Mercedes-Benz commercial vehicles.

• OEM: 749589010900 MERCEDES-BENZ
• Cojali reference: 50105030

The Cojali 50105014 Wrench for Octagonal Axle Nut (1″ Drive, 100 mm) is designed for precise removal and installation of Scania front axle nuts.

• OEM: 98560 SCANIA
• Cojali reference: 50105014

The Cojali 50105038 Wrench for Octagonal Axle Nut (110 mm, 1″ Drive) is designed for efficient removal and installation of octagonal axle nuts on BPW trailer axles.

• OEM: 03.364.27.04.0 BPW
• Cojali reference: 50105038

The Cojali 50105017 Wrench For Octagonal Axle Nut (1″ Drive, 95 mm) is designed for precise removal and installation of SCANIA axle nuts.

• OEM: 99089 SCANIA
• Cojali reference: 50105017

The Cojali 50105016 Wrench For Octagonal Axle Nut (3/4″ Drive, 80 mm) is designed for precise removal and installation of SCANIA front axle nuts.

• OEM: 99307 SCANIA
• Cojali reference: 50105016

The Cojali 50105036 Wrench for Octagonal Axle Nut (120 mm) is designed for safe and efficient removal and installation of BPW axle hubcap nuts.

• OEM: 50105036
• Cojali reference: 50105036

The Cojali 50105013 Wrench For Octagonal Axle Nut, H41, 80 MM is designed for the precise removal and installation of Scania front wheel axle nuts.

• OEM: 50105013
• Cojali reference: 50105013

• O2-1 Scopebox can not only capture the circuit signal quickly, but also slowly display the waveform to be observed and analyzed.
• It can record and store the tested signal waveform, which makes the failure analysis very convenient.

• The XENTRY Diagnosis VCI made by BOSCH is the latest interface for Mercedes and SMART vehicles
• Pass-through interface provides complete communication between a vehicle and the XENTRY software
• Support new Mercedes-Benz Diagnosis, SCN Coding, and Programming.
• Fully compatible with the DoIP protocol and Wi-Fi

• Advanced All-in-One Key Programmer
• Key and Chip Programmer Reads/Writes and Learns Keys to the Vehicle
• Performs EEPROM-data Functions Needed for European Vehicles
• Enables Programming of Infrared Keys for Mercedes Vehicles and IC Chip Keys on Late Model Hyundai Kia Vehicles
• Supports Data Read/Write of 3,000 Plus Chip Types (inc. EEPROM, engine ECU, MCU, IMMO ECU)
• Compatible with the AUTEL IM product line

• Supports the error diagnosis and maintenance services of YANMAR electrical control devices.

SCR / DPF  Emulator for Zetor Proxima , Forterra Tier 4F

SCR / DPF  Emulator for Zetor Proxima , Forterra Tier 4F Plug & Play

• ZF-Testman Pro checks the functionality of all electronically controlled ZF products.
• All transmission-specific data required for a fast and comprehensive diagnosis are retrievable by the ZF diagnosis system Testman.

The Cojali 50105173 ZF TraXon Gearbox Kit is designed for the complete disassembly and assembly of 12- and 16-speed ZF TraXon transmissions used in heavy-duty vehicles such as MAN, DAF, and IVECO. The kit includes specialized tools for pulling, positioning, sealing, and aligning components, ensuring safe and precise gearbox servicing.

• OEM: 50105173
• Cojali reference: 50105173

• Jaltest WST is a portable device intended for checking and adjusting brake pad wear sensors of commercial vehicles, bus and trailer.

• Genuine diagnostic tool Cummins Inline 7 including diagnostic cables
• Supports wide a range of machines with Cummins engines

• This is a solution that will provide the workshop with a high added value and it will allow it to take care of the calibrations of the ADAS systems, that are increasingly present in the commercial vehicle sector.

• ETM is a JalTest software additional module used to verify the EBS brake modules of commercial vehicles.
• Just as with Jaltest, it is a dynamic tool that is continually evolving, that is why it will be updated three times per year.
• Maximum connection speed

• Mobile device designed to check the power supply and the signals that are transferred between the tractor head and the towed vehicle, such as lighting, signalling signals, and CAN communication.

• This MASTER software package allows working with all the bench-boot protocols of agriculture, trucks and buses. 
• Configure it according to your requirements and work.

• Easy to diagnose your vehicle with additional tools;
• Buy MaxiIM IM508S - get XP400 and 2 years software update!

This device will allow you to check the status of both passive and active speed sensors. In addition, there is an option to simulate signals from these types of sensors to check the behavior directly in the control unit to which the sensors would be connected.

• MDC10
• MDC11
• MDC12

• BIKE AND MARINE power supply and adapter cable kit for NAVIGATOR TXT MULTIHUB