Menu
Your Cart

FREE DELIVERY FOR ALL PRODUCTS!

OEM Diagnostic Tools | OEM Scan Tools

OEM Diagnostic Tools (Original Equipment Manufacturer) diagnostic tools are specialized hardware and software tools developed by automotive manufacturers. They are designed to interface with the vehicles they produce to diagnose, troubleshoot, and sometimes even reprogram various electronic components and systems within the vehicle.

These tools are usually tailored to the specific needs of the vehicles produced by the manufacturer and can provide in-depth information that general or third-party diagnostic tools may not be able to access. OEM diagnostic tools often communicate directly with the vehicle's onboard computers, allowing them to read error codes, view real-time data, and run specific diagnostic tests.

Typically, OEM diagnostic tools are used by authorized dealers and service centers, since they might require specialized training and can be quite expensive. They are essential for performing complex diagnostic procedures, software updates, and sometimes even required for warranty service work.

In some industries outside of automotive, you might also find OEM diagnostic tools, created by manufacturers of specific equipment, used for similar purposes of troubleshooting and maintaining those specialized products.

Model: AGCOCANUSB

• AGCO Diagnostic Tool Edt;
• RoGator; • Challenger; • ISEKI; • FENDT; • SISU; • FELLA; • SpraCoupe; • GLEANER; • Sunflower; • Laverda; • TerraGator; • Massey Ferguson; • Valtra; • WHITE Planters.

• AGCO Diagnostic Tool Edt;
• RoGator; • Challenger; • ISEKI; • FENDT; • SISU; • FELLA; • SpraCoupe; • GLEANER; • Sunflower; • Laverda; • TerraGator; • Massey Ferguson; • Valtra; • WHITE Planters.

2,500.00€
Model: RST
  • Original BOBCAT diagnostic interface
  • Connect, monitor and diagnose Loaders, Excavators, Utility Work Machines, VersaHandlers.
  • Original BOBCAT diagnostic interface
  • Connect, monitor and diagnose Loaders, Excavators, Utility Work Machines, VersaHandlers.
2,100.00€
Model: CANUSB
  • With the help of some optional features the CANUSB can be used for error monitoring and diagnostics
  • Allow defects to be identified quickly and the on-board management system to be configured and updated
  • With the help of some optional features the CANUSB can be used for error monitoring and diagnostics
  • Allow defects to be identified quickly and the on-board management system to be configured and updated
1,600.00€
Model: DPA5
  • Best possible complete diagnostics and programming, troubleshooting, view diagnostic procedures and schemes for New Holland, CASE, KOBELCO, STEYR, FLEXICOIL
  • Best possible complete diagnostics and programming, troubleshooting, view diagnostic procedures and schemes for New Holland, CASE, KOBELCO, STEYR, FLEXICOIL
1,400.00€
Model: VCI560MUX
  • The only dedicated DAF diagnostic tool;
  • Compatible with DAF trucks up to year 2017 (Euro 1-5);
  • Has 2 types of cables for the newer and older trucks;
  • The only dedicated DAF diagnostic tool;
  • Compatible with DAF trucks up to year 2017 (Euro 1-5);
  • Has 2 types of cables for the newer and older trucks;
1,520.00€
Model: DST

Comprising of a DENSO developed computer interface, this complete and easy to use package provides everything you need for advanced troubleshooting on DENSO diesel common rail applications (pumps and injectors).

Comprising of a DENSO developed computer interface, this complete and easy to use package provides everything you need for advanced troubleshooting on DENSO diesel common rail applications (pumps and injectors).

1,800.00€
Model: 02937571
  • Diagnostic scanner and programming tool used for Deutz controllers
  • Highest access level in the market
  • Diagnostic scanner and programming tool used for Deutz controllers
  • Highest access level in the market
1,550.00€
Model: UVIM
  • Doosan Diagnostic Tool is for the diagnosis of electronic fuel injection diesel engines
  • Supported types TIER-3, TIER-4
  • Doosan Diagnostic Tool is for the diagnosis of electronic fuel injection diesel engines
  • Supported types TIER-3, TIER-4
1,450.00€
Model: HALDEXDIAG+

Haldex diagnostic tool DIAG+ allows to read and delete diagnostic codes, program vehicle parameters and End-of-line-Test the EB+ system.

Haldex diagnostic tool DIAG+ allows to read and delete diagnostic codes, program vehicle parameters and End-of-line-Test the EB+ system.

1,800.00€
Model: HIABINTERFACE
  • HIAB control systems are designed to give maximum efficiency and productivity.
  • HIAB control systems are designed to give maximum efficiency and productivity.
1,590.00€
Model: HITACHI-KIT
  • Diagnostic tool for Hitachi;
  • Off-Highway Diagnostic Tool
 
  • Diagnostic tool for Hitachi;
  • Off-Highway Diagnostic Tool
 
800.00€
Model: HYSTERYALE
  • PC Service tool with CAN USB interface 
  • PC Service tool with CAN USB interface 
700.00€
Model: ELTRAC
  • Can perform diagnosis and module programming 
  • Provides various engine tests
  • Comes with a cable for old (pre-OBD2) trucks
  • Can perform diagnosis and module programming 
  • Provides various engine tests
  • Comes with a cable for old (pre-OBD2) trucks
1,450.00€
Model: EST 892/01174
  • Multi-functional dealership construction vehicles scanner
  • Multi-functional dealership construction vehicles scanner
1,299.00€
Model: EDLV3
  • Electronic Data Link (EDL) is genuine dealer diagnostic PC-to-vehicle interface
  • View service manuals
  • Make diagnostics
  • Readings
  • Tests and calibrations
  • Re-program controllers
  • Electronic Data Link (EDL) is genuine dealer diagnostic PC-to-vehicle interface
  • View service manuals
  • Make diagnostics
  • Readings
  • Tests and calibrations
  • Re-program controllers
1,950.00€
Model: INCADO
Forklifts must be maintained properly to keep them running, because everyday without forklift is direct loss of money for business. With dedicated diagnostic tool for Jungheinrich you can avoid forklift malfunction, make system adjustments. If you will face any problem with these forklift trucks you..
1,350.00€
Model: NEOKNORRBREMSE
  • Trailer disc brakes diagnostic system
  • With the help of this diagnostic solution, you can read and delete the fault recorder, and also carry out a System Test
  • Allows the configuring of various additional functions of the trailer control system and thereby the broadening of the systems range of functions
  • Trailer disc brakes diagnostic system
  • With the help of this diagnostic solution, you can read and delete the fault recorder, and also carry out a System Test
  • Allows the configuring of various additional functions of the trailer control system and thereby the broadening of the systems range of functions
1,450.00€
Model: LIEBHERR
  • Diagnostic solution for various control devices for Liebherr off-highway machines and construction machines.
  • Diagnostic solution for various control devices for Liebherr off-highway machines and construction machines.
400.00€
Model: CANBOX2
  • CANBOX2 - dealer service diagnostic tool, it covers all Linde CAN system forklifts models.
  • CANBOX2 - dealer service diagnostic tool, it covers all Linde CAN system forklifts models.
1,250.00€
MAN CATS T200 with WI-FI/LAN | MAN Truck Diagnostic Tool
Out Of Stock
Model: MANCATST200
  • Possible to work with Man Cats 3;
  • Also supports trucks with CAN BUS (Man Cats II cannot!);
  • Possible to work with Man Cats 3;
  • Also supports trucks with CAN BUS (Man Cats II cannot!);
1,950.00€
Model: T427
  • The latest original OEM diagnostic tool for MAN, including buses and the NEOPLAN.
  • This is a device manufactured in late 2018 to newest models 2023.
  • Works only with MAN CATS 3 software.
 
  • The latest original OEM diagnostic tool for MAN, including buses and the NEOPLAN.
  • This is a device manufactured in late 2018 to newest models 2023.
  • Works only with MAN CATS 3 software.
 
1,550.00€
Model: MTUDIASYS
  • Works for MTU engines and systems
  • Works with Diesel Engine Generator
  • Support engines used in Marine, Rail and Mining
  • Works for MTU engines and systems
  • Works with Diesel Engine Generator
  • Support engines used in Marine, Rail and Mining
1,100.00€
Model: 0000147720
  • Upgraded second generation diagnostic interface for CLAAS machinery.
  • This new version of CLAAS interface support 4 CAN connections and WI-FI.
  • Older CAN-USB interface will be not supported by newer CLAAS agricultural machines
  • Upgraded second generation diagnostic interface for CLAAS machinery.
  • This new version of CLAAS interface support 4 CAN connections and WI-FI.
  • Older CAN-USB interface will be not supported by newer CLAAS agricultural machines
1,900.00€
Model: 478-0235-CA3
  • Made in Canada. Original interface which safe to use with CAT machines.
  • Supports Caterpillar machinery and engines up to 2023
  • This is the only recommended communication device for CAT and the only one that has CAT Data Link (CDL) protocol required to properly communicate with CAT engines.
  • Made in Canada. Original interface which safe to use with CAT machines.
  • Supports Caterpillar machinery and engines up to 2023
  • This is the only recommended communication device for CAT and the only one that has CAT Data Link (CDL) protocol required to properly communicate with CAT engines.
1,500.00€
Model: PERKINSEST
  • Best solution to scan Perkins equipment and Perkins electrical systems. 
  • Best solution to scan Perkins equipment and Perkins electrical systems. 
1,899.00€
Model: DEC2
  • Solution to diagnose Scania marine engines, construction machines, generator sets, railway and forestry machines as well as in irrigation systems who has DEC2 control system.
  • A laptop based program is available to make it easier for service personnel to detect and rectify faults which may arise and to adjust certain parameters.
  • Solution to diagnose Scania marine engines, construction machines, generator sets, railway and forestry machines as well as in irrigation systems who has DEC2 control system.
  • A laptop based program is available to make it easier for service personnel to detect and rectify faults which may arise and to adjust certain parameters.
1,140.00€
Model: VCI1
  • Truck diagnostic tool for older Scania trucks manufactured before 2004
  • For diagnosis of newer Scania, please refer to the updated version - Scania VCI2 or VCI3
  • Provides diagnosis and programming
  • Truck diagnostic tool for older Scania trucks manufactured before 2004
  • For diagnosis of newer Scania, please refer to the updated version - Scania VCI2 or VCI3
  • Provides diagnosis and programming
1,100.00€
Model: SDCONNECTC4
  • The new generation for Mercedes Benz wireless SD connect c4 is the latest one on market for all current and new coming 12V and 24V MB vehicles.
  • Real-time reading of dynamic data
  • Key configuration
  • The new generation for Mercedes Benz wireless SD connect c4 is the latest one on market for all current and new coming 12V and 24V MB vehicles.
  • Real-time reading of dynamic data
  • Key configuration
799.00€
SD Connect C5 Diagnostic Tool | Truck and Car Diagnostic Tool
-29 %
Model: SDCONNECTC5
  • Latest interface firmware version
  • More stable and faster day to day work
  • Better cooling system - has two built in coolers
  • Latest interface firmware version
  • More stable and faster day to day work
  • Better cooling system - has two built in coolers
999.00€ 1,400.00€
Model: 88890300
  • Euro 6 support
  • Works with Renault trucks with DXI and DTI engines, supports EURO 6
  • 12 months warranty
  • Euro 6 support
  • Works with Renault trucks with DXI and DTI engines, supports EURO 6
  • 12 months warranty
1,400.00€
Model: 88894000
  • Second edition original VOCOM 2 made in Germany by ACTIA
  • Second edition original VOCOM 2 made in Germany by ACTIA
1,350.00€
Model: 88894200
  • The original Vocom 2 Mini.
  • Support EURO 6
  • The original Vocom 2 Mini.
  • Support EURO 6
950.00€
Model: WABCOKIT

Diagnostic Interface 3 (USB)

Diagnostic Interface 3 (USB)

1,350.00€
Model: THERMOKINGDIAG
  • Thermo King Diagnostic Tool 
  • Thermo King Diagnostic Tool 
500.00€
Model: YANMARSMART
  • Supports the error diagnosis, and mounting and maintenance services of electrical control devices.
  • Yanmar diagnostic tool
  • Supports the error diagnosis, and mounting and maintenance services of electrical control devices.
  • Yanmar diagnostic tool
900.00€
Model: DPA06
  • ZF-Testman Pro checks the functionality of all electronically controlled ZF products.
  • All transmission-specific data required for a fast and comprehensive diagnosis are retrievable by the ZF diagnosis system Testman.
  • ZF-Testman Pro checks the functionality of all electronically controlled ZF products.
  • All transmission-specific data required for a fast and comprehensive diagnosis are retrievable by the ZF diagnosis system Testman.
3,400.00€
Model: INLINE7
  • Genuine diagnostic tool Cummins Inline 7 including diagnostic cables
  • Supports wide a range of machines with Cummins engines
  • Genuine diagnostic tool Cummins Inline 7 including diagnostic cables
  • Supports wide a range of machines with Cummins engines
1,990.00€
Showing 1 to 37 of 37 (1 Pages)