ALL PRODUCTS

• O2-1 Scopebox can not only capture the circuit signal quickly, but also slowly display the waveform to be observed and analyzed.
• It can record and store the tested signal waveform, which makes the failure analysis very convenient.

• The XENTRY Diagnosis VCI made by BOSCH is the latest interface for Mercedes and SMART vehicles
• Pass-through interface provides complete communication between a vehicle and the XENTRY software
• Support new Mercedes-Benz Diagnosis, SCN Coding, and Programming.
• Fully compatible with the DoIP protocol and Wi-Fi

• Advanced All-in-One Key Programmer
• Key and Chip Programmer Reads/Writes and Learns Keys to the Vehicle
• Performs EEPROM-data Functions Needed for European Vehicles
• Enables Programming of Infrared Keys for Mercedes Vehicles and IC Chip Keys on Late Model Hyundai Kia Vehicles
• Supports Data Read/Write of 3,000 Plus Chip Types (inc. EEPROM, engine ECU, MCU, IMMO ECU)
• Compatible with the AUTEL IM product line

• Supports the error diagnosis and maintenance services of YANMAR electrical control devices.

SCR / DPF  Emulator for Zetor Proxima , Forterra Tier 4F

SCR / DPF  Emulator for Zetor Proxima , Forterra Tier 4F Plug & Play

• ZF-Testman Pro checks the functionality of all electronically controlled ZF products.
• All transmission-specific data required for a fast and comprehensive diagnosis are retrievable by the ZF diagnosis system Testman.

• Jaltest WST is a portable device intended for checking and adjusting brake pad wear sensors of commercial vehicles, bus and trailer.

• Genuine diagnostic tool Cummins Inline 7 including diagnostic cables
• Supports wide a range of machines with Cummins engines

• This is a solution that will provide the workshop with a high added value and it will allow it to take care of the calibrations of the ADAS systems, that are increasingly present in the commercial vehicle sector.

• ETM is a JalTest software additional module used to verify the EBS brake modules of commercial vehicles.
• Just as with Jaltest, it is a dynamic tool that is continually evolving, that is why it will be updated three times per year.
• Maximum connection speed

• Mobile device designed to check the power supply and the signals that are transferred between the tractor head and the towed vehicle, such as lighting, signalling signals, and CAN communication.

• This MASTER software package allows working with all the bench-boot protocols of agriculture, trucks and buses. 
• Configure it according to your requirements and work.

• Autel best quality EV charging cable has excellent charging speeds and is compatible with nearly all-electric vehicles and hybrids type 2 (IEC 62196-2), supports current up to 32A and charging up to 22kW (1-phase, or 3-phase).

• Easy to diagnose your vehicle with additional tools;
• Buy MaxiIM IM508S - get XP400 and 2 years software update!

AIR2 SAN is a sanitiser entirely manufactured in Italy which introduces important innovations aimed at guaranteeing the best possible elimination of viruses, bacteria and mildews.

This device will allow you to check the status of both passive and active speed sensors. In addition, there is an option to simulate signals from these types of sensors to check the behavior directly in the control unit to which the sensors would be connected.

• MDC10
• MDC11
• MDC12

• BIKE AND MARINE power supply and adapter cable kit for NAVIGATOR TXT MULTIHUB

• Single Sided Mounting pole for MaxiCharger AC Wallbox

Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and GEL cell).

• This MASTER software package allows working with all the OBD Protocols of agriculture, trucks and buses. 
• Configure it according to your requirements and work.

• Comes with 2 years of licence included. 2 years free updates.
• MaxiSYS Ultra Maximize your Intelligence;
• Five in one device: Oscilloscope, multimeter, waveform generator, can bus check, four isolated channels;

Instrument to measure the speed (rpm) of a component, for example a fan. Includes turns counter functionality.

• Double Sided Mounting pole for MaxiCharger AC Wallbox

• This MASTER software package allows working with all the bench-boot protocols of bikes. 
• Configure it according to your requirements and work.

• Powerful Combination of Advanced Key Programming/ All System Diagnostics/ Advanced Maintenance Services
• Smart Mode for Guided and Automated Key Learning, Expert Mode for Advanced Key Learning
• 2 Year of warranty and 2 year of free software updates

• Diagnostic cable set for JALTEST diagnostic tool. Reference number: 29362 
• Maximum connection speed

• This MASTER software package allows working with all the OBD Protocols of bikes. 
• Configure it according to your requirements and work.

• Comes with 2 years of license and updates
• Fast, easy-to-use, and ultraportable immobilizer and key programming device.
• 24 Common Service Resets including the most common (Oil Reset Service, EPB, BMS, SAS, DPF)

• Diagnostic tool for VOLVO marine engines 
• Support PENTA marine engines

• This MASTER software package allows working with all the OBD Protocols of cars and light commercial vehicles. 
• Configure it according to your requirements and work.

• NEW! Professional Diagnostic Tool;
• OBDII Bi-Directional Diagnostic Scanner and TPMS Service Tool with Bluetooth VCI;

• This MASTER software package allows working with all the bench-boot protocols of cars and light commercial vehicles. 
• Configure it according to your requirements and work.

• NEW! Advanced Diagnostic Tablet;
• Ability to read/erase codes;

• This MASTER software package allows working with all the bench-boot protocols of marines and PWC. 
• Configure it according to your requirements and work.

• This MASTER software package allows working with all the OBD Protocols of marines and PWC. 
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the Bench-Boot Protocols of Agriculture -Truck & Buses
• Configure it according to your requirements and work.

• NEW MS906 set, standard version;
• Free technical support;

• This SLAVE software package allows working with all the OBD Protocols of Agriculture -Truck & Buses
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the OBD Protocols of bikes, ATV & UTV
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the Bench-Boot Protocols of cars and light commercial vehicles. 
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the OBD Protocols of cars and light commercial vehicles. 
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the Bench-Boot Protocols of Marine & PWC
• Configure it according to your requirements and work.

• This SLAVE software package allows working with all the OBD Protocols of Marine & PWC
• Configure it according to your requirements and work.

• Enhance your motorcycle diagnostics with the IDC6 Plus Bike software activation from TEXA. This advanced tool is specifically designed for motorcycles, offering precise diagnostics across a variety of makes and models. With features like real-time data monitoring, fault code analysis, and system testing, it enables comprehensive evaluations and quick troubleshooting. Ideal for motorcycle repair shops and technicians, the IDC6 Plus Bike ensures accurate maintenance and optimal performa

• This SLAVE software package allows working with all the Bench-Boot Protocols of Bike -ATV & UTV
• Configure it according to your requirements and work.