VOLVO / RENAULT All Truck Models | Fault DTC Cleaner | Error Code Cleaner

VOLVO/RENAULT

VOLVO / RENAULT All Truck Models | Fault DTC Cleaner | Error Code Cleaner

Error Code Cleaner / Eraser – Volvo & Renault Trucks

Price:

115.00€

: In Stock! Estimated Delivery Time: 2-4 Days
Brand: BALTICDIAG
Model: VRcomER_CB
SKU: BD10553

Qty

Buy now

Ask Question

Add to Wish List

Description
WHAT IS THE DTC CLEANER?

Error Code Cleaner / Eraser – Volvo & Renault Trucks (OBD, from 2004)

Pocket-sized error code cleaner designed for all Volvo® and Renault® trucks with OBD connection, manufactured from 2004 onwards. The device is completely standalone – no computer or additional software required. Compact and easy to carry, always ready to use.

Easy to use

Switch on the ignition.
Plug the cleaner into the diagnostic socket.
Wait until the Working LED stops flashing and turns solid (Done).
Switch off the ignition and disconnect the device.

The whole process takes less than a minute, removing all inactive fault codes.

Supported systems

Engine ECU and aftertreatment modules (EMS, ACM)
Central vehicle controllers (VMCU, BBM, CCM, CIOM, CCIOM)
Braking and retarder systems (EBS, RET)
Automatic transmission (TECU)
Door, cab and frame modules (DDM, PDM, RCIOM, FCIOM, CMF, CMR)
Instruments, multimedia and driver assistance (IC, HMIIOM, DACU, LPOS, radar, TGW2 telematics)
All other systems and MIDs within V2 / V3 / V4 electrical systems

Supported Volvo models

FH (4), FM (4), FH16 (4), FMX (4)
FH (4) Euro 5, FM (4) Euro 5
FL, FE, FL Euro 6, FE Euro 6
All Volvo models with V3 and V4 electrical systems

Supported Renault models

Magnum DXi
Premium DXi
Midlum DXi
Kerax DXi
Range T, Range C, Range K, Range D
All Renault models with V2, V3 and V4 electrical systems

The eraser disables power limitation and limp mode after exhaust aftertreatment system failures in Euro 6 vehicles!

The Error Code Cleaner checks the connection with the vehicle. If there is no connection with the vehicle, it informs about it with the "Error" indicator. Thanks to this, you can be sure that unwanted errors have been removed!

The Error Code Cleaner is equipped with three controls:

Power: It is always lit when the Cleaner has power supply from the diagnostic connector.
Working/Done: This LED blinks when the eraser is working and is permanently on when the eraser finishes its work successfully.
Error: It is permanently on if there is no connection with the vehicle or blinks when the device is connected to an unsupported vehicle.

What is the DTC Cleaner?

The DTC Cleaner is a device that effectively removes inactive errors or faults from a vehicle. It functions similarly to a diagnostic tool and needs to be connected to the OBD (On-Board Diagnostics) port. Once connected, it scans the vehicle's components by directly accessing their control units and clears any errors they may be displaying.

Why use a DTC Cleaner?

The DTC Cleaner proves invaluable when drivers need to erase faults on the go, especially those caused by faulty vehicle components. It requires no expertise in diagnostics as it can be effortlessly plugged in to do the job for the driver.

For instance, in cases where faults occur in the SCR (Selective Catalytic Reduction) system, drivers often find themselves restricted by a capped vehicle speed (Limp mode) after a specific duration, with the vehicle stuck in a single gear and limited to a maximum speed of 15-30 mph, resulting in sluggish performance, especially when carrying heavy loads.

Our DTC Cleaner can reset the Limp mode timer for the vehicle, allowing the driver to complete their tasks and conveniently reach a service center. If immediate SCR repairs are not feasible, worry not; you can use the DTC Cleaner as many times as needed until you're ready to address the SCR system repair.

What errors does it clear?

The DTC Cleaner functions like a "Clear All" button on a diagnostic system, enabling the clearance of any other inactive errors present in the vehicle. However, it cannot resolve errors resulting from active physical faults within the vehicle.

For specific information on the units to which the DTC Cleaners can connect and the faults they can clear, please feel free to contact us.

Tags: dtc error delete , truck fault code delete , volvo error delete , OBD DTC Error Removal , truck DTC Cleaner Tool , Vehicle Error Code Remover , Engine Code Error Fixer , Diagnostic Trouble Codes Cleaner

Frequently Asked Questions

Do you offer international shipping for your products? ❯: Yes, we offer fast international express delivery for all products available at BalticDiag.com. We deliver worldwide — including the USA, Europe, North America, South America, Asia, Africa, and Australia — using trusted courier services such as DHL, UPS, and FedEx. Every order is shipped with express delivery straight to your door, ensuring a quick and secure arrival. Shipping fees are included in the product price, and we provide full tracking information so you can monitor your package from dispatch to delivery.

Please note that some products include free delivery, while others require confirmation of shipping costs before purchase. In most cases, pallet-sized packages have additional delivery charges that must be calculated in advance by our sales team.
How can I pay for my order on Balticdiag.com? ❯: We accept a wide range of secure global and local payment methods, including:

Credit & Debit Cards: Visa, Mastercard, American Express, Discover, Diners Club, JCB, China UnionPay, Cartes Bancaires (France)

Digital Wallets: Apple Pay, Google Pay, PayPal, Alipay, Revolut Pay, MobilePay (Denmark & Finland), Link with Instant Bank Payments (USA)

Local Payment Methods: Bancontact (Belgium), BLIK & Przelewy24 (Poland), iDEAL (Netherlands), giropay (Germany), EPS (Austria), Klarna (buy now, pay later), SEPA Direct Debit (EU), Kakao Pay, Naver Pay, PAYCO (South Korea)

Bank Transfers: We also support traditional wire transfers.