Menu
Your Cart

VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser

VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
VOLVO CE Series E/H Tier 4 Final | Error Code Cleaner / Eraser
  • Error Code Cleaner / Eraser – Volvo CE E/H Series (Tier 4 Final / Stage V)

trust-pilot-reviews

UPS-FEDEX-EXPRESS DELIVERY

Price:
200.00€
  • : In Stock! Estimated Delivery Time: 2-4 Days
  • Brand: BALTICDIAG
  • Model: VcomER_CE_EH

 

Error Code Cleaner / Eraser – Volvo CE (Tier 4 Final / Stage V)

Standalone error code cleaner designed for Volvo Construction Equipment machines manufactured from 2014 until now. The device works fully autonomously – no laptop or software required. Simply connect it to the diagnostic port and the clearing process will start automatically.

 

Easy to use

  1. Switch the ignition ON and wait a few seconds.
  2. Connect the cleaner to the diagnostic connector.
  3. The green LED will start blinking – wait until it becomes solid.
  4. Switch ignition OFF and disconnect the device.

That's all! All inactive error codes from supported systems are cleared within seconds.

 

Supported systems

  • EMS – Engine Management System
  • ACM – Aftertreatment Control Module
  • All other ECUs in the machine are supported

 

Additional functions

  • EATS Reset (Soot Reset) – resets soot load value in the exhaust aftertreatment system
  • Disables Torque Reduction caused by SCR/Aftertreatment failure

 

Supported Volvo CE models

  • All H-Series Wheel Loaders (e.g., L45H, L120H, L150H)
  • All E-Series Excavators (ECxxxE, EWxxxE – e.g., EC380E, EW140E)
  • All Volvo CE machines with Electrical System V4

 

This tool supports disabling Torque Reduction caused by Exhaust Aftertreatment System failure!

 

What is the DTC Cleaner?

The DTC Cleaner is a device that effectively removes inactive errors or faults from a vehicle. It functions similarly to a diagnostic tool and needs to be connected to the OBD (On-Board Diagnostics) port. Once connected, it scans the vehicle's components by directly accessing their control units and clears any errors they may be displaying.

Why use a DTC Cleaner?

The DTC Cleaner proves invaluable when drivers need to erase faults on the go, especially those caused by faulty vehicle components. It requires no expertise in diagnostics as it can be effortlessly plugged in to do the job for the driver.

For instance, in cases where faults occur in the SCR (Selective Catalytic Reduction) system, drivers often find themselves restricted by a capped vehicle speed (Limp mode) after a specific duration, with the vehicle stuck in a single gear and limited to a maximum speed of 15-30 mph, resulting in sluggish performance, especially when carrying heavy loads.

Our DTC Cleaner can reset the Limp mode timer for the vehicle, allowing the driver to complete their tasks and conveniently reach a service center. If immediate SCR repairs are not feasible, worry not; you can use the DTC Cleaner as many times as needed until you're ready to address the SCR system repair.

What errors does it clear?

The DTC Cleaner functions like a "Clear All" button on a diagnostic system, enabling the clearance of any other inactive errors present in the vehicle. However, it cannot resolve errors resulting from active physical faults within the vehicle.

For specific information on the units to which the DTC Cleaners can connect and the faults they can clear, please feel free to contact us.

Frequently Asked Questions

Do you offer international shipping for your products?
How can I pay for my order on Balticdiag.com?