S-Link IP | Scania Error Eraser with DTC Reading and DoIP Support

New SCANIA

S-Link IP | Scania Error Eraser with DTC Reading and DoIP Support

S-Link IP – read and clear Scania faults DoIP + CAN

Price:

145.00€

: In Stock! Estimated Delivery Time: 2-4 Days
Brand: BALTICDIAG
Model: S-Link_IP_S

Qty

Buy now

Ask Question

Add to Wish List

Description
WHAT IS THE DTC CLEANER?

S-Link IP – read and clear Scania faults (DoIP + CAN)

Third-generation diagnostic interface and fault eraser for all Scania® trucks and buses with OBD connection, manufactured from 2004 until today. Supports the DoIP and CAN diagnostic protocols, covering Scania Euro 4, Euro 5 and Euro 6, including the new generation and Scania Super. Read diagnostic codes and clear faults straight from your browser – no external software required.

Key features

DoIP and CAN diagnostic protocol support
Reading of diagnostic codes from the newest vehicles – even where the driver menu no longer shows faults
Selective clearing – the program deliberately clears faults only from the engine ECU and the emissions aftertreatment system (EEC), leaving the other systems untouched, so their DTC history is preserved
Full clearing program also available when you need to clear all systems
Easy firmware updates

Two operating modes

S-Link IP can be used in two ways, depending on your needs:

Standalone mode – once plugged into the diagnostic socket, the device clears faults without a phone or computer. Quick and convenient when you just need to clear faults on the spot.
Browser-controlled mode – connect to the WiFi network broadcast by S-Link IP, enter the device address in your browser and get full access to the menu from your smartphone or PC. Full control: reading diagnostic codes and clearing faults, with no additional software.

Supported models

Scania R, S, G, P – Euro 4 / 5 / 6
Scania Super
Scania buses Euro 4 / 5 / 6
All Scania vehicles with OBD from 2004 until today

S-Link IP disables power limitation and limp mode caused by exhaust aftertreatment faults in Scania Euro 6 vehicles!

What is the DTC Cleaner?

The DTC Cleaner is a device that effectively removes inactive errors or faults from a vehicle. It functions similarly to a diagnostic tool and needs to be connected to the OBD (On-Board Diagnostics) port. Once connected, it scans the vehicle's components by directly accessing their control units and clears any errors they may be displaying.

Why use a DTC Cleaner?

The DTC Cleaner proves invaluable when drivers need to erase faults on the go, especially those caused by faulty vehicle components. It requires no expertise in diagnostics as it can be effortlessly plugged in to do the job for the driver.

For instance, in cases where faults occur in the SCR (Selective Catalytic Reduction) system, drivers often find themselves restricted by a capped vehicle speed (Limp mode) after a specific duration, with the vehicle stuck in a single gear and limited to a maximum speed of 15-30 mph, resulting in sluggish performance, especially when carrying heavy loads.

Our DTC Cleaner can reset the Limp mode timer for the vehicle, allowing the driver to complete their tasks and conveniently reach a service center. If immediate SCR repairs are not feasible, worry not; you can use the DTC Cleaner as many times as needed until you're ready to address the SCR system repair.

What errors does it clear?

The DTC Cleaner functions like a "Clear All" button on a diagnostic system, enabling the clearance of any other inactive errors present in the vehicle. However, it cannot resolve errors resulting from active physical faults within the vehicle.

For specific information on the units to which the DTC Cleaners can connect and the faults they can clear, please feel free to contact us.

Frequently Asked Questions

Do you offer international shipping for your products? ❯: Yes, we offer fast international express delivery for all products available at BalticDiag.com. We deliver worldwide — including the USA, Europe, North America, South America, Asia, Africa, and Australia — using trusted courier services such as DHL, UPS, and FedEx. Every order is shipped with express delivery straight to your door, ensuring a quick and secure arrival. Shipping fees are included in the product price, and we provide full tracking information so you can monitor your package from dispatch to delivery.

Please note that some products include free delivery, while others require confirmation of shipping costs before purchase. In most cases, pallet-sized packages have additional delivery charges that must be calculated in advance by our sales team.
How can I pay for my order on Balticdiag.com? ❯: We accept a wide range of secure global and local payment methods, including:

Credit & Debit Cards: Visa, Mastercard, American Express, Discover, Diners Club, JCB, China UnionPay, Cartes Bancaires (France)

Digital Wallets: Apple Pay, Google Pay, PayPal, Alipay, Revolut Pay, MobilePay (Denmark & Finland), Link with Instant Bank Payments (USA)

Local Payment Methods: Bancontact (Belgium), BLIK & Przelewy24 (Poland), iDEAL (Netherlands), giropay (Germany), EPS (Austria), Klarna (buy now, pay later), SEPA Direct Debit (EU), Kakao Pay, Naver Pay, PAYCO (South Korea)

Bank Transfers: We also support traditional wire transfers.