-150x150w.jpg)
Osciloscopios Automotrices
Model: BD25651
- The kit includes various test terminals and connectors. They are particularly convenient to store neatly in one place and to be used by all technicians for inspection and repair work. With the help of this kit, you will be able to diagnose and test vehicle electronic control systems.
- The kit includes various test terminals and connectors. They are particularly convenient to store neatly in one place and to be used by all technicians for inspection and repair work. With the help of this kit, you will be able to diagnose and test vehicle electronic control systems.
156.20€
Model: ACP1000
- The ACP1000 AC current probe is clamp-on core design. It tests the circuit current safely and directly without disconnecting the circuit. This method permits a safe,easy and portable current measurement.
- The ACP1000 AC current probe is clamp-on core design. It tests the circuit current safely and directly without disconnecting the circuit. This method permits a safe,easy and portable current measurement.
288.43€
Model: ATO2002
- Portable tablet design with all-in-one functions
- Comprehensive auto diagnostic presets
- Powerful signal capture and analysis capabilities
- Support PC & Smartphone remote control
- HDMI function for training & demonstration
- Life-long free software online upgrade
- Portable tablet design with all-in-one functions
- Comprehensive auto diagnostic presets
- Powerful signal capture and analysis capabilities
- Support PC & Smartphone remote control
- HDMI function for training & demonstration
- Life-long free software online upgrade
742.98€
Model: ATO2004
- Portable tablet design with all-in-one functions
- Comprehensive auto diagnostic presets
- Powerful signal capture and analysis capabilities
- Support PC & Smartphone remote control
- HDMI function for training & demonstration
- Life-long free software online upgrade
- Portable tablet design with all-in-one functions
- Comprehensive auto diagnostic presets
- Powerful signal capture and analysis capabilities
- Support PC & Smartphone remote control
- HDMI function for training & demonstration
- Life-long free software online upgrade
1,238.84€
Model: CarScopePLUS Master
Oscilloscope set CarScope PLUS Master Starter kit is configured to offer the basic accessories for the lowest possible price. Additional accessories can be added later and when required. You will be able to test most electrical and electronic sensors, actuators and circuits in the modern veh..
1,238.84€
Model: CarScopePLUS Starter
Oscilloscope set CarScope PLUS Starter Starter kit is configured to offer the basic accessories for the lowest possible price. Additional accessories can be added later and when required. You will be able to test most electrical and electronic sensors, actuators and circuits in the modern ve..
660.33€
Model: CarScopeVisoMaster
- Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
- Test various actuators and solenoids;
- Observe fuel injector and fuel pump signals;
- View CAN bus signals;
- Basic primary and secondary ignition measurements.
- Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
- Test various actuators and solenoids;
- Observe fuel injector and fuel pump signals;
- View CAN bus signals;
- Basic primary and secondary ignition measurements.
1,238.84€
Model: CarScopeVisoStarter
- Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
- Test various actuators and solenoids;
- Observe fuel injector and fuel pump signals;
- View CAN bus signals;
- Basic primary and secondary ignition measurements.
- Test most engine sensors - lambda, mass airflow (MAF), MAP, ABS, TPS, camshaft/crankshaft position and etc;
- Test various actuators and solenoids;
- Observe fuel injector and fuel pump signals;
- View CAN bus signals;
- Basic primary and secondary ignition measurements.
908.26€
Model: CP2100
- Current measuring clamps are designed for measuring extremely small currents. It is possible to measure direct and alternating current.
- Current measuring clamps are designed for measuring extremely small currents. It is possible to measure direct and alternating current.
313.22€
-17 %
Model: PicoBNC+
- 2000A current clamps allow you to measure up to 2000 amps without cutting, disconnecting or tearing wires. Simply snap the clamps onto the cable you want to measure and connect the clamp to the PicoScope you are using.
- 2000A current clamps allow you to measure up to 2000 amps without cutting, disconnecting or tearing wires. Simply snap the clamps onto the cable you want to measure and connect the clamp to the PicoScope you are using.
205.79€ 247.11€
ELECTRIC VEHICLES
Model: EM101N
- Combination of 2-channel oscilloscope and multimeter.
- Non-slip silicone cover for added product protection.
- The EM101N can be used in wireless mode or it can be used in wired mode with the LAUNCH X-431 EURO TAB III.
- Combination of 2-channel oscilloscope and multimeter.
- Non-slip silicone cover for added product protection.
- The EM101N can be used in wireless mode or it can be used in wired mode with the LAUNCH X-431 EURO TAB III.
660.33€
Out Of Stock
Model: STANDRADKIT4
- Los kits de diagnóstico automotriz de Pico funcionan con su PC para medir y probar prácticamente todos los componentes y circuitos eléctricos y electrónicos en cualquier vehículo moderno
- Los kits de diagnóstico automotriz de Pico funcionan con su PC para medir y probar prácticamente todos los componentes y circuitos eléctricos y electrónicos en cualquier vehículo moderno
2,250.00€
Model: SATO1004
- Equipped with highly sensitive digital trigger system and comprehensive Automotive Diagnostic software preset, the SATO able to help mechanics quickly and easily find out all kinds of problem on all types of vehicles, including circuits on Charging/Start up, various Sensors and Actuators, Ignition system, and Networks (CAN, CAN FD, LIN, Flexray, K line) etc. Combined with Micsig's unique touch algorithm patented technology, the SATO brings unparalleled operating experience to automoti
- Equipped with highly sensitive digital trigger system and comprehensive Automotive Diagnostic software preset, the SATO able to help mechanics quickly and easily find out all kinds of problem on all types of vehicles, including circuits on Charging/Start up, various Sensors and Actuators, Ignition system, and Networks (CAN, CAN FD, LIN, Flexray, K line) etc. Combined with Micsig's unique touch algorithm patented technology, the SATO brings unparalleled operating experience to automoti
742.98€
Model: VATO2004
- VATO2004 is a portable affordable split-type automotive diagnostic oscilloscope, most compact design with a built-in battery. It features 200MHz bandwidth, 4 channels, 1GSa/s sampling rate, up to 50Mpts memory
- VATO2004 is a portable affordable split-type automotive diagnostic oscilloscope, most compact design with a built-in battery. It features 200MHz bandwidth, 4 channels, 1GSa/s sampling rate, up to 50Mpts memory
453.72€
Model: O2-1 Scopebox
- O2-1 Scopebox can not only capture the circuit signal quickly, but also slowly display the waveform to be observed and analyzed.
- It can record and store the tested signal waveform, which makes the failure analysis very convenient.
- O2-1 Scopebox can not only capture the circuit signal quickly, but also slowly display the waveform to be observed and analyzed.
- It can record and store the tested signal waveform, which makes the failure analysis very convenient.
1,082.64€
Mostrando 1 a 15 de 15 (1 Páginas)
