-150x150w.webp)
Preguntas Frecuentes
- ¿Ofrecen envío internacional para sus productos? ❯
- ¿Cómo puedo pagar mi pedido en Balticdiag.com? ❯
AST605 | Autool | Brake System Fluid Replacement Device
AST605 | Autool | Brake System Fluid Replacement Device
- Built-in Pressure Monitoring System
- Widely Applicable
- High Efficiency
- Powerful Recovery Function
Precio:
371.07€
- : En stock
- Marca: Autool
- Model: AST605
- SKU: BD25623
AST605 Brake System Fluid Replacement Device
AUTOOL AST605 This pulsed brake fluid exchanger effectively avoids air bubbles during filling and optimizes or avoids the manual venting process compared to conventional pressurized brake fluid exchangers. Powerful recovery function, it can quickly recover used brake fluid at the same time. The air inlet port has a water separating and filtering device, which can separate the moisture in the air, avoid it mixing with the oil, and ensure quality.
Features
- Built-in Pressure Monitoring System: The pump for filling the brake fluid reservoir is equipped with a pressure monitoring device. You can adjust the pressure through the adjustable knob, the pressure range is 0.7-2.5 BAR. If the pressure cannot be established or the pump sucks in the air, the pump will shut down automatically. Besides, The recycling bottle can be placed in the machine body, which is easy to carry.
- Widely Applicable: AUTOOL AST605 is suitable for European, American, and Asian car brake fluid tanks, it almost can apply for all vehicles. This pulsating brake oil exchange device is applicable for Dot3, Dot4, and Dot5.1 brake oil standards.
- High Efficiency: Our main bleed kit requires only one person to operate and allows you to easily use and change the brake oil. It can change four sub-pumps oil at the same time, after setting the working environment, the whole exchange process is automatic, so don’t worry about being too busy.
- Optimize Advantage: Compared with the traditional compression brake fluid bleeding device, the pulsating electric brake oil exchanger can effectively avoid the formation of bubbles in the process of adding brake fluid, to optimize and avoid the artificial exhaust process. AUTOOL AST605 has a powerful recovery function, which can quickly recover the used brake fluid at the same time.
How To Use
- Note: no need to start the vehicle for the operation.
- Raise the car to a suitable height so the drive wheels are not on the ground.
- Connect the one oil pot of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure that oil flows out.
- Pour in 2L of new brake fluid from the fuel filler port of the equipment, and find the matching model connector to connect to the fuel filler of the brake master cylinder.
- Connect to 12V car power and turn on the power switch button.
- Press the Vacuum Switch button.
- Press the Fuel Switch button to change the brake fluid.
- During the oil changing process, look at the car brake oil tank mouth, if the refueling is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
- After the oil change is completed, the used oil in the tank of the equipment must be drained clean. If it’s not emptied clean, the vacuum pump will be damaged and the oil change operation cannot be performed.
-120x100w.webp "LAUNCH")
