-150x150w.webp)
Preguntas Frecuentes
- ¿Ofrecen envío internacional para sus productos? ❯
- ¿Cómo puedo pagar mi pedido en Balticdiag.com? ❯
HTS518 | Autool | Internal Combustion Engine Cleaning Device
HTS518 | Autool | Internal Combustion Engine Cleaning Device
- External air source
- Integrated design
- Built-in dust filter
- Deep removal of carbon deposits
- Multiple adapters
Precio:
412.40€
- : En stock
- Marca: Autool
- Model: HTS518
HTS518 Internal Combustion Engine Cleaning Device
Through the high-pressure airflow sprayed into the engine intake duct, high-pressure and high-speed sand particles will tumble and crash in the closed intake duct, so that the intake valve and cylinder wall of the Then the walnut sand and carbon mixture will be recycled to the sand storage barrel through the special connector to maintain the health of the engine. Then the walnut sand and carbon mixture is recycled to the sand storage barrel to keep the engine in a healthy state and ensure that the engine continues to provide high-quality power.
What is Walnut Sand?
The raw material of walnut sand is a walnut shell, which is made and synthesized through strict screening and classification and multiple processes after the walnut shell is broken. It is a walnut extract and belongs to metal polishing media. It has the characteristics of high hardness, high-pressure resistance, and wear resistance, and the surface is microporous. It has strong adsorption and sewage interception ability, no corrosion and no pollution. Walnut shell is a natural and non-chemical raw material, so using walnut sand as an abrasive will not damage the surface of the workpiece, and using walnut sand to clean auto carbon deposition will not damage the engine, the cleaning effect is remarkable and the cost is low.
What is carbon deposition?
There are some hydrocarbon olefin residues attached to the engine intake, cylinder when the fuel burns in the engine not completely. It residues change into a hard black shell in high-temperature conditions, called carbon deposition.
Why need Clean Carbon Deposition?
Carbon deposition will decrease the air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status all the thing will hurt the engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip.
Features
- External air source: This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
- Integrated design: The walnut sand grit can be sprayed and recovered simultaneously.
- Built-in dust filter: It can separate the recovered walnut sand grit from carbon deposits for recycling.
- Deep removal of carbon deposits: Deeply removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
- Multiple adapters: Equipped with 23 kinds of adapters, suitable for a variety of models, such as BMW, Volkswagen, Mercedes-Benz, GM, and VOLVO.NISSAN and so on.
How To Use
- Step 1: Open the headcover of AUTOOL HTS518 and pour it into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close the cover.
- Step 2: Join the spray gun muzzle and recycle the hose together. (there is a hole in the recycle hose)
- Step 3: Remove the intake manifold of the engine, plug the spray gun into the intake, and turn the crankshaft to close the intake valve. Then connect the high-pressure air pump((not included)) to HTS518.
- Step 4: Connect AC power, and start clean. The process should last 1-3 minutes. (depending on carbon deposition circumstances)
- Step 5: Close AUTOOL HTS518, check cleaning result. Normally, the walnut powder can be reused 5-10 times. (depending on carbon deposition circumstances)
-120x100w.webp "LAUNCH")
